The DSPbR Edge repeater provides a flexible. compact and cost-effective coverage for in-fill rebroadcast solutions in multi-channel and multi-band P25 APCO Phase 1 and Phase 2 networks without compromising the performance of the network. Edge provides low or high RF output powers and other configurable parameters on a per-channel basis and caters for in-building DAS designs of any size. Using, RF over Fibre or coaxial cable, Linked multi-chassis DSPbR Edge designs are ideally suited to large multi-building campus designs.
Manufacturing Facilities
Campuses
Shopping Malls
Office Buildings
Basements and Carparks
Service and Maintenance Tunnels
Be Heard In The Crowd
The DSPbR Edge repeater with TRex channelised trunking extension provides a flexible, compact and cost-effective coverage for in-fill rebroadcast solutions in multi-channel and multi-band APCO 25 Phase 1 and 2 networks without compromising the performance of the critical network.
Edge provides low or high RF output powers and other configurable parameters on a per-channel basis and caters for in-building DAS designs of any size.
RF Of-air, RFORF or coaxial cable linked multi-chassis DSPbR designs are ideally suited to large multi-building campus designs.
Simplify Projects
DSPbR Edge reduces the number of rebroadcast solution platforms required and suits many indoor and outdoor coverage applications.
Plug and play modules allow an inventory to be held and site-specific configurations to be assembled or expanded as needed in a timely manner.
The Edge can reduce network build by allowing in-fill and remote location coverage solutions to be realised at optimum costs without needing to use expensive network sites and core licenses.
Further project and customer savings can be achieved as DSPbR Edge sites don’t require separate backhaul or large scale site development CAPEX.
Simplify The Design
DSPbR Edge can provide for In-band or cross-band frequency translation and therefore it allows for any available spectrum to be deployed for in-fill coverage solutions. It is an excellent solution for multi-band terminal equipment.
Simplify quotation
The standard architecture of the DSPbR Edge allows for coverage enhancement to be designed and costed with minimum time and effort. Configuration bundles can be created and quickly provided across a range of different applications,
Supporting ‘per site’ installation, maintenance and spares costing and budgeting can also be quickly derived from these bundles.