UHF 6 Element Yagi, 9dBd, 450-480MHz
The YB Series are high gain yagi antennas which will provide excellent point to point communication in RF control, short or long haul link and other applications calling for highly directional antennas. YB Series antennas exhibit narrow beamwidths and high front to back ratios to help minimize potential interference to and from other systems.
On the YB6-61, the feed element of each antenna is of full folded dipole construction thus offering maximum bandwidth and reliability. The dipole element is welded to the boom to ensure low intermodulation performance and maximum durability. The passive elements are thru mounted to the circular boom section and welded at each side to further minimize the potential for both corrosion and generation of intermodulation products. The alodined protective finish provides a conductive surface to ensure effective earthing of the antenna when mounting.
Constructed with 2 to 16 elements, YB Series yagi antennas offer a choice of gain and beamwidth characteristics and can be configured in stacks or bays for higher gain applications in either horizontally or vertically polarised systems.
Yagi antennas rest at ground potential to provide excellent lightning protection and reduced precipitation static noise.
Termination is via an ‘N’ female coaxial connector fitted to a short Durathene cable tail. Durathene polyethylene jacketed cable provides superior resistance to weathering and abrasion and is less susceptible to bird attack than standard PVC sheathed cables.
For extreme climatic or corrosive applications, the stainless steel YBSS Series or black ruggedized RDA Series yagis should be considered.
• All welded construction for maximum and reliable performance
• Narrow beamwidths & high front to back ratios effective in reducing interference
• Alodine finish provides an excellent conductive surface for earthing
• Can be configured in stacks or bays for higher gain applications using PH and PHE series phasing harnesses
|Nominal Gain dBd||9|
|Frequency MHz||450 to 480MHz|
|Tunable Bandwidth||Full band|
|Front/Back Ratio dB||18 (Typical)|
|Construction||All welded aluminum with alodined finish|
|Termination||N female with short 9008 cable tail|
|Mounting Area||3.9″ x .9″ diam. alodined aluminum|
- To download the pattern file right click on the file and select “Save Link As”. The desired file format can then be viewed in your network planning software.
|Shipping Weight (lbs.)||5|
|Shipping Dims (inches)||40x12x6|