dipole-array-8dbd-400-520mhz

UHF Elliptical Dipole Array, 8dBd, 400-520MHz

The EA series arrays provide exceptionally high gain with an elliptical shaped radiation pattern, ideal for the bi-directional coverage requirements of some “corridor” applications.

Call or email RFI to place an order at (330) 486-0706 or [email protected]
SKU: EA80-67-P Category:

EA80-67-P Features:

The UHF Elliptical arrays utilize an internal phasing harness in PTFE based double screened coaxial cable with polyethylene jacket to aid waterproofing and resist bird attack.

The main lobe of these antennas is strong and highly controlled with extensive sidelobe suppression ensuring the integrity of the pattern. Superior performance is maintained over the entire operating bandwidth of the antenna (400-520 MHz). VSWR is maintained at <1.5:1 and input power levels of 500 watts are catered to for true high-density site requirements.

With all welded construction and superior internal harness construction (using highly stable PTFE based cables), the antennas provide not only excellent radiation characteristics but also high levels of intermodulation and noise suppression. IM performance is a world-leading -150dBC based on a two-carrier test. The entire array rests at ground potential and offers the ultimate in lightning resistant antennas.

• Ideal for highly populated sites requiring “corridor” style largely bidirectional coverage
• Inverted mounting version available
• Extensive sidelobe suppression and null fill
• Hermetically sealed internal phasing harness
• Industry-leading PIM ratings (-150dBc) providing low IM and low noise characteristics for optimum performance

(1) EA40 and EA80 series may be optionally supplied in all welded 316 Marine Grade Stainless steel. Dimensions vary slightly

Nominal Gain dBd 9
Frequency MHz 400 to 520MHz
Tunable Bandwidth Full band
VSWR <1.5:1
Downtilt N/A
Polarization Vertical
Vertical Beamwidth 34°
Horizontal Beamwidth 70°
Power W 500
Passive IM 3rd Order (2x20W) dBc <-150
Construction All welded aluminum with alodined finish.
Length (inch) 118
Weight (pound) 17.6
Termination 4.3-10 female with 20in RG142 cable tail
Mounting Area 20in x 1.9in diam. aluminum
in else

 

PDF Downloads

Digitized Patterns

    To download the pattern file right click on the file and select “Save Link As”. The desired file format can then be viewed in your network planning software.
Shipping Weight (lbs.) 85
Shipping Dims (inches) 126x17x12