UHF Elliptical Dual Dipole Array, 2 x 5dBd, 400-520MHz, PIM Rated

The RFI range of UHF dipole arrays provide expanded bandwidth, high power ratings and unequalled performance in gain, pattern and intermodulation performance.

Ever increasing costs and site density requirements are reducing availability of antenna positions on prime sites. In order to reduce the overall number of antennas the RFI dipole array series provides system engineers and site owners with a flexible solution to reduce antenna numbers.

Request New AccountLog-In
SKU: EA4040-67-DIN Category:

The EA4040-67-DIN Single Section Multiple Array – A combination of two arrays mounted upon a single piece of mast section. These arrays are common where any combination of medium gain UHF omnidirectional, offset or elliptical arrays are required. The feeding of each of the arrays is via separate coaxial cable tails at the base of the array.

 

Nominal Gain dBd 2 x 5
Frequency MHz 400 to 520MHz
Tunable Bandwidth Full. No tuning required
VSWR <1.5:1
Polarisation Vertical
Vertical Beamwidth 34
Horizontal Beamwidth 70
Power W 500
Passive IM 3rd Order (2x20W) dBc <-150
Construction All welded aluminium with alodined finish
Length (inch) 118.11
Weight (pound) 17.63
Termination 7/16 DIN Female on cable tail
Mounting Area 20″ x 2.5″ diam. aluminum
 

PDF Downloads

Shipping Weight (lbs.) 85
Shipping Dims (inches) 126x17x12

[recaptcha]