UHF Binary Dipole Array, 9dBd, 400-520MHz, 3° Downtilt
These high performance UHF dipole arrays are ideal for highly populated radio sites requiring long haul omnidirectional coverage. They operate over entire bands and offer gains of 3, 6 or 9dBd (depending on model) exhibiting a VSWR of <1.5:1 across the band.
The BA160-67-DIN-T3 arrays utilize an internal phasing harness in PTFE based double screened coaxial cable with polyethylene jacket to aid waterproofing and resist bird attack. The use of a unique phasing arrangement provides extensive sidelobe suppression and null fill characteristics. The arrays will accept an input power level of 500 watts continuous, making them ideal for high power multiple transmitter applications. The BA80 series are offered with 3°, 5° or 8° downtilt, to further enhance close-in coverage characteristics.
All welded alodined aluminum construction and new fabrication techniques in both the harness and dipole sections have proven to minimize intermodulation and noise generated within the antennas. The entire array rests at ground potential and offers the ultimate in lightning resistant antennas.
• Ideal for highly populated sites requiring long-haul omnidirectional coverage
• Operate over entire 400-520 MHz band
• Inverted mounting version available
• Versions with 0°, 3°, 5° or 8° of downtilt available
• Extensive sidelobe suppression and null fill
• Industry-leading PIM ratings (-150dBc) providing low IM and low noise characteristics for optimum performance
(1) Factory pre-set downtilt of 3°, 5° or 8° may be specified on BA80 series antennas using model no. trailer – T3, -T5 or -T8
(2) Ruggedized black powder coat finish (aids in ice shedding for extreme conditions) is available on all aluminum arrays.
(3) BA40 and BA80 series may be optionally supplied in all welded 316 Marine Grade Stainless steel. Dimensions vary slightly.
|Nominal Gain dBd||9|
|Frequency MHz||400 to 520MHz|
|Tunable Bandwidth||Full. No tuning required|
|Horizontal Beamwidth||Omni /- 0.5dB|
|Passive IM 3rd Order (2x20W) dBc||<-140|
|Construction||All welded aluminium with alodined finish.|
|Termination||7/16 DIN Female on cable tail|
|Mounting Area||20″ x 2.5″ diam. aluminium|
- To download the pattern file right click on the file and select “Save Link As”. The desired file format can then be viewed in your network planning software.
|Shipping Weight (lbs.)||175|
|Shipping Dims (inches)||126x22x17|