VHF Screened Dipole Array, 5dBd, 106° Beamwidth, 148-174MHz

The FSA Series arrays are based on the popular OA Series dipole array antennas. Supplied in “kit” form, these antennas are delivered in flat-pack packaging to minimize freight and warehousing issues and allow for simplified assembly at time of installation.

Request New AccountLog-In
SKU: FSA10-41-DIN Category:

FSA10-41-DIN Features:

The FSA Series arrays are based on the popular OA Series dipole array antennas. Supplied in “kit” form, these antennas are delivered in flat-pack packaging to minimize freight and warehousing issues and allow for simplified assembly at time of installation.

The FSA Series arrays have approximately 105° horizontal beamwidth and offer 5 or 7dBd in gain. The use of the flat screen reflector boosts the front to back ratio considerably allowing for
tailoring antenna patterns for frequency re-use in extended networks.

With all welded construction and superior internal harness construction, the antennas provide not only excellent radiation characteristics but also defined, high levels of intermodulation and noise suppression. IM performance is -140dBc based on a two-carrier test. The entire array rests at ground potential and offers the ultimate in lightning resistant antennas.

• Offset (cardioid) pattern with 105° nominal Horizontal Beamwidth
• High front to back ratio to allow frequency re-use by tailoring coverage areas
• Hermetically sealed internal PTFE based phasing harness capable of 750W continuous operation.
• Shipped unassembled for ease of handling, easily assembled on site
• Direct DC grounded for lightning protection and reduction of precipitation static noise
• Industry-leading dual sectioned antenna PIM ratings (- 140dBc) providing low IM and low noise characteristics for optimum performance

Nominal Gain dBd 5
Frequency MHz 148-174MHz
Tunable Bandwidth Full. No tuning required
VSWR <1.5:1 (14dB)
Vertical Beamwidth 70°
Horizontal Beamwidth 106°
Front/Back Ratio dB 17
Power W 750
Passive IM 3rd Order (2x20W) dBc -140
Construction Welded aluminum, corrosion protection plating
Dimensions (inch) Screen: 51″ x 41″
Weight (pound) 31.96
Termination 716 DIN female on cable tail
Mounting Area Clamps included to suit pole diameter 2″ – 3.5″

PDF Downloads

Digitised Patterns

    To download the pattern file right click on the file and select “Save Link As”. The desired file format can then be viewed in your network planning software.
Shipping Weight (lbs.) 45
Shipping Dims (inches) 53x43x12

[recaptcha]